Product image

Tehowatti Air SPLIT air-to-water heat pump

Overview

House and hot water heating with air-to-water heat pump

Jäspi Tehowatti Air Split is an air-to-water heat pump that heats the house and hot water in an energy-efficient way. The system is a great solution both for a new house as a heating system and for a renovation house as a substitute for oil heating.

  • Can be connected to underfloor heating or to radiators already in the property
  • Suitable for most detached houses (50-200 m²)
  • Power-adaptable outdoor unit – maximum power with minimum energy consumption
  • Significant energy savings
  • Environmentally friendly
  • State-of-the-art technology
  • Pleasant to use
  • Installation-friendly total delivery
  • Operating range down to -20 ° C
  • Produces max. 58 degree water
  • MyUpway remote monitoring as standard

House and hot water heating with air-to-water heat pump

Jäspi Tehowatti Air Split is an air-to-water heat pump that heats the house and hot water in an energy-efficient way. The system is a great solution both for a new house as a heating system and for a renovation house as a substitute for oil heating.

  • Can be connected to underfloor heating or to radiators already in the property
  • Suitable for most detached houses (50-200 m²)
  • Power-adaptable outdoor unit – maximum power with minimum energy consumption
  • Significant energy savings
  • Environmentally friendly
  • State-of-the-art technology
  • Pleasant to use
  • Installation-friendly total delivery
  • Operating range down to -20 ° C
  • Produces max. 58 degree water
  • MyUpway remote monitoring as standard

Heat according to the power demand of the house

The Tehowatti Air Split system consists of three parts:

  1. The outdoor unit is a Split air-to-water heat pump that takes energy from the outdoor air and transfers the heat thus obtained to the indoor unit via a compressor.
  2. The indoor heat transfer unit transfers heat from the refrigerant to the water between the outdoor unit and the indoor unit.
  3. Through the indoor unit, heat is distributed to the interior and hot water. The energy content of the outside air decreases as the air cools. If the heat pump does not provide enough energy from outside to meet the needs of the property, the heating element of the indoor unit will automatically assist the heating and provide the necessary additional heat.

How the system works

The heat output of the Split outdoor unit of the air-to-water heat pump is automatically fine-tuned according to weather conditions and heat needs. This keeps the unit’s energy use as efficient as possible. Energy is taken from the outside air down to -20 ° C. At very low temperatures, the additional energy is obtained in stages by the heating element, which guarantees the minimum consumption of additional heat. As energy is taken from the outside air, ice accumulates in the outdoor unit during frostbite. Tehowatti Air is delivered with equipment that defrosts automatically if necessary. In all situations, the device takes care of defrosting the outdoor unit and draining the defrost water, ie condensate, into the sewer or drainage system of the house. This prevents ice from accumulating under or around the outdoor unit.

The indoor unit of the air-to-water heat pump distributes the heat produced by the pump and heats the heating circuit and hot water alternately. The indoor unit has an intelligent control system that adapts the operation of the pump to the heat demand of the house. The control logic continuously optimizes the airflow (speed-controlled fan), cold circuit flow (electronic expansion valve) and heat distribution circuit. In addition, the indoor unit has an electric heater that automatically takes care of heat adequacy even in the event of a frost. The indoor unit is only 1.8 meters high, but it has a built-in accumulator that can hold 215 liters of water, which is enough hot water for even a large need.

The equipment delivery includes the equipment and components required for installation. These components (including control automation, expansion tank, circulating water pumps, buffer tank, changeover and safety valves) are factory-installed and tested. This speeds up the installation work and ensures the high quality of the system.

In a 1969 house, the oil boiler was replaced by Tehowatti Air Split 6 kW.

Show more Show less

Specifications

Indoor unit
Power9 kW
Measurements H x W x D1670 x 600 x 620 mm
Weight115 kg
Volume215 l
Outdoot unit Split 6Outdoor unit SplitOutdoor unit SplitOutdoor unit Split
Measurements H x W x D640 x 800 x 290 mm750 x 880 x 340 mm845 x 970 x 410 mm1300 x 970 x 370 mm
Weight46 kg60 kg74 kg105 kg
KompressorTwin RotaryTwin RotaryTwin RotaryTwin Rotary
Lowest operating temp.-20 °C-20 °C-20 °C-20 °C
Water temp.max 58 °Cmax 58 °Cmax 58 °Cmax 58 °C
InstallationPlumber or refrigeration installerPlumber or refrigeration installerPlumber or refrigeration installerPlumber or refrigeration installer
Slab measurements H x D800 x 850 mm800 x 850 mm800 x 850 mm
Stand measurements H x W x D
(for slab)
400 x 510 x 720 mm400 x 580 x 720 mm400 x 580 x 720 mm400 x 580 x 720 mm
Energy marking (system) *A++A++A++
Sound pressure level dB(A)**37414448
HVAC no (system)505855450585485058549

* In average climatic conditions 35/55 °C
** Sound pressure level of the outdoor unit at a distance of 2 meters in free space

Property fuse main fuse: min. 3x24A (current transformers as standard)

Hot water output 40 ° C, in eco-normal-luxury mode 220-250-280 l

Guides

Compatible accessories